| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| skeg on pro angler 12, 2015 model http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=56270 |
Page 1 of 1 |
| Author: | rrwilson [ Tue Oct 20, 2015 7:47 am ] |
| Post subject: | skeg on pro angler 12, 2015 model |
My skeg will not come up when you pull the control, what is the best way to go about fixing this. Do I go inside the hatch or from bottom? |
|
| Author: | Yak9107 [ Wed Oct 21, 2015 4:38 am ] |
| Post subject: | Re: skeg on pro angler 12, 2015 model |
Do a search. The skeg has had issues. Look for wraps inside with your cell phone. Unscrew the skeg from the boat and make sure the hinge bolt is relaxed where the skeg can go up and down freely. You also might want to reroute your skeg line. Good luck. |
|
| Author: | mmiller [ Wed Oct 21, 2015 11:39 am ] |
| Post subject: | Re: skeg on pro angler 12, 2015 model |
http://www.hobiecat.com/forums/viewtopic.php?f=130&t=54598 |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|