Hobie Forums
http://www.hobie.com/au/en/forums/

Another new PA 14
http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=56758		 Page 1 of 2
Author:  Tombsy [ Sun Jan 17, 2016 3:07 pm ]
Post subject:  Another new PA 14
My boat is paid for and the shipment finally made it to cowtown :), been waiting for months. Still can't pick it up yet, going to chase bones next week but I'll get it when we get back.
I had waaay to much time to shop for accessories while I've been waiting, this is what I've got so far. lol

BassYaks saltwater motor kit with 45lb. Mina-Kota, EM throttle and lift kit.
Seadeck grey/black for PA14
Lowrance Elite 7X Chirp
Lowrance Elite 4MHD Chart-plotter
Anchor Wizard with custom H-Rail mount
2 Ram fly rod holders on H-rail mounts
Ram conventional rod holder with Hobie wedge mount
Radpole GoPro mount
Ram Aquabox iPhone mount
H-Crate and cover
2 LiFe batteries for electronics
Voltmeters/USB charger, misc connectors and wire
Anchor trollies
Emergency kit
Safety flag and light
MTI Dio F-Spec PFD and knife
Simms Freestone wader pants
Rod leashes
Hobie dolly wheels
Kayak cover
Custom trailer for the PA and Yamaha Zuma under construction by North Woods Sport Trailers
2015 Forester 2801QS Class C motorhome to pull it.




Sent from my iPad using Tapatalk
Author:  Dr.SteelheadCatcher [ Sun Jan 17, 2016 4:05 pm ]
Post subject:  Re: Another new PA 14
WOW, what a start!
Author:  Hutch [ Mon Jan 18, 2016 4:54 pm ]
Post subject:  Re: Another new PA 14
Pictures of your custom h-rail mount for the anchor wizard please!
Author:  Tombsy [ Mon Jan 18, 2016 5:52 pm ]
Post subject:  Re: Another new PA 14
Hope it holds up its only for a light anchor in lakes.
It's a delrin plate attached to a Hobie accessorie base.

ImageImage


Sent from my iPad using Tapatalk
Author:  Hutch [ Mon Jan 18, 2016 6:38 pm ]
Post subject:  Re: Another new PA 14
Thanks for sharing!
Author:  Carver [ Tue Feb 02, 2016 2:37 pm ]
Post subject:  Re: Another new PA 14
I have always said , " if your gonna do it , do it like you mean it ! "

Good job, your gonna have a blast.
Author:  SRAces [ Thu Feb 04, 2016 9:15 pm ]
Post subject:  Re: Another new PA 14
Congrats on the new PA! :mrgreen:
Author:  Simonspop [ Wed Feb 10, 2016 11:37 am ]
Post subject:  Re: Another new PA 14
Congrats, I can feel your excitement! Make sure to post pics of yak when you get these things installed
Author:  Tombsy [ Fri Feb 19, 2016 5:59 pm ]
Post subject:  Re: Another new PA 14
Making some progress, the motor mount and wiring are done, made a switch panel to replace one of the rod holders.ImageImageImageImage


Brian
Author:  BitchMonkey [ Wed Feb 24, 2016 4:53 pm ]
Post subject:  Re: Another new PA 14
Slick panel!
Author:  KansasYaker [ Wed Feb 24, 2016 7:50 pm ]
Post subject:  Re: Another new PA 14
Your switch panel looks very similar to what I did last year.

Image

One thing I have noticed is that sometimes I turn on/off a switch with my big feet, but then again I lave longs legs being 6'6".
Author:  Tombsy [ Wed Feb 24, 2016 8:06 pm ]
Post subject:  Re: Another new PA 14
Thanks I saw yours and used it for inspiration, I even bought the same panel but I wanted to add the second voltmeter for the motor battery so I used the parts from it.
Pretty much all done, finished the wiring , installed the Seadek and Anchor Wizard. Now just need some soft water to dial it in.
ImageImageImage


Brian
Author:  KansasYaker [ Wed Feb 24, 2016 9:27 pm ]
Post subject:  Re: Another new PA 14
Wow, talk about fully decked out. Sweet looking ride. Do I see 2 Lowrance units? I'm adding the H-rail upgrade to my 2014 PA14 this weekend along with a new Lowrance 7TI. Do you have any closeups of how you mounted the larger unit to your rail?
Author:  Tombsy [ Thu Feb 25, 2016 9:25 am ]
Post subject:  Re: Another new PA 14
Sure no problem, my Elite 7X Chirp doesn't have GPS so I have a separate unit. I used the rectangular ball mount plate and short extension. I wasn't sure but the ball mounts are really solid.
Image
Image
Author:  KansasYaker [ Thu Feb 25, 2016 2:52 pm ]
Post subject:  Re: Another new PA 14
Thanks for the pics. I think I know what I need to order now to mount mine correctly.
Page 1 of 2 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/