Maybe this will help. Looks like p/n:84504801 and 2 of 84504401
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| H Rail Stern Handle http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=57819 |
Page 1 of 1 |
| Author: | starsky [ Tue May 31, 2016 1:15 pm ] |
| Post subject: | H Rail Stern Handle |
Hi, was wondering if anyone had the part number for the newer H Rail stern handles, would like to retrofit my 2014 PA12 that has a round bar stern handle. Thanks |
|
| Author: | 7.3Excursion4x4 [ Wed Jun 01, 2016 6:25 am ] |
| Post subject: | Re: H Rail Stern Handle |
Maybe this will help. Looks like p/n:84504801 and 2 of 84504401
|
|
| Author: | starsky [ Wed Jun 01, 2016 9:57 am ] |
| Post subject: | Re: H Rail Stern Handle |
Thanks for the reply, I think that is the same tube I have now, the round tube, I'm wondering if it's a different part number for the H Rail bar (the bar with 12 sides for accessories). Thanks |
|
| Author: | 7.3Excursion4x4 [ Wed Jun 01, 2016 4:28 pm ] |
| Post subject: | Re: H Rail Stern Handle |
Ok, Try this http://cdn.hobiecat.com/digital_assets/ ... vVATny.pdf on page 29 of broacher in the bottom right, they have a complete h-rail upgrade kit for older hobies part numbers 84626001 or 84626101 |
|
| Author: | starsky [ Wed Jun 01, 2016 4:35 pm ] |
| Post subject: | Re: H Rail Stern Handle |
I actually ordered that kit and installed it, it replaces the round bars on the sides with H Rails. This is one of the reasons why I would like to also change the stern round bar, I would like H Rails all the way around to match. I might have to call a dealer on this one, I have had no luck online so far. Thanks for the help. |
|
| Author: | tfs8271 [ Mon Mar 12, 2018 6:55 am ] |
| Post subject: | Re: H Rail Stern Handle |
Okay, I'm going to do the same. Hoping 84626001 is the right one for the stern. Would be cool if you could buy stock H-rail and cut to fit. |
|
| Author: | tfs8271 [ Wed Mar 21, 2018 6:23 am ] |
| Post subject: | Re: H Rail Stern Handle |
Well it doesn't fit... The H-rail rod is not long enough on the 9" upgrade. I was thinking of drilling some holes in the H-rail to lock in place to keep it from sliding but I still think there isn't enough pipe to support the weight of the boat and not affect the handle attachments from rotating. Hobie - If you're listening... Sell stock H-rail to cut to size. I want to buy all your gadgets that attach to said rail. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|