| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| PA12 Replacement Steering Cord Length? http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=59140 |
Page 1 of 1 |
| Author: | IN2DEEP [ Mon Sep 19, 2016 6:38 pm ] |
| Post subject: | PA12 Replacement Steering Cord Length? |
Please forgive if this have been answered before (search feature turned up nothing) Going to purchase some 700lb cord from ACK to use as back-up or replacement for my 2012 PA12 when that day eventually comes that I need to make the repair to my steering system. My buddy just broke his back near the drum on his 2012 recently. How much (feet) should I get? Thanks, Scott |
|
| Author: | mmiller [ Tue Sep 20, 2016 8:23 am ] |
| Post subject: | Re: PA12 Replacement Steering Cord Length? |
These drawing should help! http://static.hobiecat.com/web_uploads/2016/09/20/Assembly_Pro_Angler_12_Control_Line_Steering_Sheet.PDF http://static.hobiecat.com/web_uploads/2016/09/20/Assembly_Pro_Angler_12_Control_Line_UpDown_Sheet.PDF |
|
| Author: | IN2DEEP [ Tue Sep 20, 2016 5:55 pm ] |
| Post subject: | Re: PA12 Replacement Steering Cord Length? |
mmiller wrote: These drawing should help! http://static.hobiecat.com/web_uploads/2016/09/20/Assembly_Pro_Angler_12_Control_Line_Steering_Sheet.PDF http://static.hobiecat.com/web_uploads/2016/09/20/Assembly_Pro_Angler_12_Control_Line_UpDown_Sheet.PDF Those are tremendously helpful. Thank you for supporting your product! |
|
| Author: | IN2DEEP [ Tue Sep 20, 2016 6:32 pm ] |
| Post subject: | Re: PA12 Replacement Steering Cord Length? |
Matt Miller, After looking closely at the assembly drawings, they look to be for the later models that have the Boa tensioning system. Do you have an assembly drawing for the older models? Pre Boa (2012) Thanks |
|
| Author: | IN2DEEP [ Mon Dec 26, 2016 9:50 am ] |
| Post subject: | Re: PA12 Replacement Steering Cord Length? |
Update to rudder line installation 2012 PA12 Someone shared this on the Pro Angler group on FB. Extremely helpful for the routing (especially around the rear pulleys) If you're on FB, it's a great group to be part of. Good info shared there. https://www.facebook.com/groups/1474524182774872/ 
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|