| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| PA 14 http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=59799 |
Page 1 of 1 |
| Author: | sid_fishes [ Mon Jan 16, 2017 1:47 pm ] |
| Post subject: | PA 14 |
can anyone pass on some info on the pa14 i have a 2014 and did the 'h' rail update and everything went well,but my mate has the early version pa14 [does have the vantage seat] but when we put the new shafts in place we notice that they hit an internal bracket. we also noticed that the old steering shafts were bent can i just lenghten the shafts or is having 'h ' rails not an option for him thanks |
|
| Author: | HStrech [ Mon Jan 16, 2017 6:23 pm ] |
| Post subject: | Re: PA 14 |
Taking a look at the serial number on the boat will help us determine what needs to be done to make this work. There's a number of PA's that fall into a certain "pre-steering-update category" that are less compatible with the H-Rail upgrade kit. However, with some modifications the kit can work. You can always go with a 9" or 21" straight H-Rail section for mounting h-rial accessories to. |
|
| Author: | rafiki2cu [ Tue Jan 17, 2017 7:48 am ] |
| Post subject: | Re: PA 14 |
I have a 2013 PA 14 that I installed the H-Rail on and had no problems. Not sure if it is the same metal bracket but I have one that the steering rod goes thru. Looking at doing the same H Rail upgrade to my wife's 2013 PA 12 |
|
| Author: | sid_fishes [ Tue Jan 17, 2017 5:11 pm ] |
| Post subject: | Re: PA 14 |
the other thing we notice was that the shaft lengths are exactly the same ill chat to him for the number and report back thanks |
|
| Author: | sid_fishes [ Sun Jan 22, 2017 1:38 pm ] |
| Post subject: | Re: PA 14 |
HStrech, the number is US-HCCEGG13H213, i hope this works[ but hes as blind as a bat so the g g could be 6 6 ] thanks for any help |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|