| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Torqeedo 403 / Micro Anchor http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=60091 |
Page 1 of 1 |
| Author: | NoSleeperII [ Mon Mar 13, 2017 4:10 pm ] |
| Post subject: | Torqeedo 403 / Micro Anchor |
I'm New to the forum. Been fishing out of a kayak for around 15 years now and finally got the Hobie bug so hear I am. So I went out at the end of 2016 and got my Camo PA 14 and have fell victim to all the great accessories available for these killer boats. So the question is, what are yalls thoughts about running the torqeedo 403 along with the micro anchor. Has anyone seen this done? I've searched for hours and hours and have not been able to find anyone who has done it. I was set on the evolve before I started looking into the 403 and quickly saw the many benefits it has over the evolve. I'm sure I can make it work, just wasn't sure if anybody here has already worked out the kinks. Thanks Y'all. |
|
| Author: | Memory Maker [ Mon Mar 13, 2017 6:48 pm ] |
| Post subject: | Re: Torqeedo 403 / Micro Anchor |
I'll check with the guys I know. |
|
| Author: | lld [ Thu Mar 16, 2017 3:58 pm ] |
| Post subject: | Re: Torqeedo 403 / Micro Anchor |
I've been doing the same as I just got my 403 in and already use the micro anchor. I couldn't find a thing either. My initial thought is to get a longer horizontal pipe and mount the ball closer to the crate space thus leaving enough space to keep the Hobie micro anchor intact. I don't see any reason why this wouldn't work, but haven't done it yet as I was eager to try out the 403. Please post if you end up doing the above or something else. I'll do the same if I get around to it. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|