Just wanted to see what everyone thought of the length of PVC Im using. It is contacting the hull all the way but was wondering if I should extend the length?
[url][URL=http://s738.photobucket.com/user/Jcorma/media/IMG_2361.jpg.html]
[/url]/url]
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Pro Angler 12 Support http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=60146 |
Page 1 of 1 |
| Author: | LoneWolf [ Tue Mar 21, 2017 3:14 pm ] |
| Post subject: | Pro Angler 12 Support |
Just wanted to see what everyone thought of the length of PVC Im using. It is contacting the hull all the way but was wondering if I should extend the length? [url][URL=http://s738.photobucket.com/user/Jcorma/media/IMG_2361.jpg.html] [/url]/url]
|
|
| Author: | Dr.SteelheadCatcher [ Tue Mar 21, 2017 8:03 pm ] |
| Post subject: | Re: Pro Angler 12 Support |
If your cross supports are 67" apart, then the PVC is just long enough. On my PA-14, I have an extra 10-12" of PVC on either end. One suggestion is to release/deploy both the rudder and tracking skeg, so the internal pulleys have the tension removed. |
|
| Author: | LoneWolf [ Wed Mar 22, 2017 4:35 am ] |
| Post subject: | Re: Pro Angler 12 Support |
OK thanks..They are only 56" apart but I have room to move the rear support back another 15". The I could slide the boat back. If I do that I wont be able to deploy the rudder and skeg but I could just release the rope so there isnt any tension. |
|
| Author: | riverfish [ Thu Mar 23, 2017 3:25 pm ] |
| Post subject: | Re: Pro Angler 12 Support |
 You could do something like this, with no PVC. I have stored this way every winter for three years. |
|
| Author: | LoneWolf [ Thu Mar 23, 2017 3:56 pm ] |
| Post subject: | Re: Pro Angler 12 Support |
Thats not a bod idea thanks |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|