The fins flex more as the adjusting screw is turned in. More flex = more forward thrust and easier pedaling (less fatigue), so I recommend for most users leave it screwed in.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| MD 180 v2 tesion adjustment http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=63342 |
Page 1 of 1 |
| Author: | WOROY1966 [ Wed Aug 01, 2018 6:17 am ] |
| Post subject: | MD 180 v2 tesion adjustment |
hello, new participant and new to hobie..i obtained my first one a couple months ago, 2018 papaya pa 14. I keep seeing stuff about adjusting fin tension, but I would like to see it done, if possible, on an md180 v2. any video links out there? I just did a quick search but I am at work atm..tia yall |
|
| Author: | mmiller [ Wed Aug 01, 2018 10:52 am ] |
| Post subject: | Re: MD 180 v2 tesion adjustment |
This manual shows the adjustment procedure (Page 12): https://static.hobiecat.com/digital_assets/Mirage_Kayak_Manual_-_MD180.pdf#page=12 |
|
| Author: | fourtogo [ Fri Aug 03, 2018 4:39 pm ] |
| Post subject: | Re: MD 180 v2 tesion adjustment |
can You explain what more and less resistance does on the fin adjustment. |
|
| Author: | Roadrunner [ Fri Aug 03, 2018 10:15 pm ] |
| Post subject: | Re: MD 180 v2 tesion adjustment |
The fins flex more as the adjusting screw is turned in. More flex = more forward thrust and easier pedaling (less fatigue), so I recommend for most users leave it screwed in.
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|