| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 360 drive making noise http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=66102 |
Page 1 of 1 |
| Author: | TLBEERS [ Fri Feb 14, 2020 5:52 pm ] |
| Post subject: | 360 drive making noise |
Hi, has anyone had issues with their 360 making noise? I have raised it off and lubed it with the lubes sold in the Hobie catalog. |
|
| Author: | mmiller [ Sat Feb 15, 2020 2:03 pm ] |
| Post subject: | Re: 360 drive making noise |
Clicking? There us a universal adjustment that can be tightened to keep the cable tight. Slight adjustment. |
|
| Author: | TLBEERS [ Sat Feb 15, 2020 7:00 pm ] |
| Post subject: | Re: 360 drive making noise |
Yes I have adjusted the screw in the bottom of the drive. |
|
| Author: | mmiller [ Sun Feb 16, 2020 2:34 pm ] |
| Post subject: | Re: 360 drive making noise |
Ask your dealer to contact warranty / support this week. They either know or can ask the engineers what might be up. If you can provide them a video with some sound of what is going on it would be a huge help. |
|
| Author: | Mtlunger [ Fri Mar 26, 2021 10:29 am ] |
| Post subject: | Re: 360 drive making noise |
Hey I also have started having a noise in 360 drive. Mine has only been used 6-7 times and then noise started while pedaling full force. Haven’t lubed yet but not sure that’s gonna be answer either. Just posting here in case of answer to problem. |
|
| Author: | Ester4me [ Sat Apr 10, 2021 8:07 am ] |
| Post subject: | Re: 360 drive making noise |
I am in the same situation and just contacted my dealer (SB Mountain Air). He was very helpful and tightened the "Idler Cable" nuts on the side which I thought the clicking sound was coming from. I hope to try it out again in a few days (Wednesday), I'll report back here with my results then. Matt, the System Admin. of this Forum, has also has posted a short video (see top of PA section thread) that discusses this issue, and how to fix it. This 360 drive is an engineering marvel, but like any BMW, it must be finely tuned and properly maintained. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|