| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Pro angler 360 clutch stuck? http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=66353 |
Page 1 of 1 |
| Author: | kyle.spartan1337 [ Thu Apr 16, 2020 6:20 am ] |
| Post subject: | Pro angler 360 clutch stuck? |
I just recently purchased a pa 12 with the 360 drive. I was out the other day and I moved the drive slightly to the left. When I went to move the drive back to the forward position there was a really bad noise coming from the handle. I have tried to adjust the steering tube but no matter what I do the clutch is stuck. Does anybody know what could be causing this? |
|
| Author: | Jbernier [ Thu Apr 16, 2020 9:18 am ] |
| Post subject: | Re: Pro angler 360 clutch stuck? |
I have reached out to Phil Dow to get you some ideas - or please get the kayak over to a dealer so they can investigate - when I get a reply from Phil I'll update the forum post. Thanks. |
|
| Author: | kyle.spartan1337 [ Thu Apr 16, 2020 9:21 am ] |
| Post subject: | Re: Pro angler 360 clutch stuck? |
I called the dealer that I bought the pro angler from earlier today and they said they have to reach out to Hobie as well and look for some answers |
|
| Author: | Jbernier [ Thu Apr 16, 2020 10:07 am ] |
| Post subject: | Re: Pro angler 360 clutch stuck? |
Sent you an e mail directly - Phil can talk to you directly - just send him your # - check your G Mail. Thanks. |
|
| Author: | CaptBulletBeard [ Sat May 04, 2024 3:30 pm ] |
| Post subject: | Re: Pro angler 360 clutch stuck? |
What was the resolution to this? I think I'm running into the same issue. I recently had to change my belt out because I thought it had snapped. During the disassembly, I fount the the belt was still in tact, albeit stretched at 2 of the teeth. Got the new belt in and reassembled, made all the necessary adjustments. Now the 360 handle is MUCH stiffer to turn, binds when turning left, and makes an awful squealing noise every few turns that comes from the clutch assembly. I wish there were instruction on how to inspect the actual clutch assembly. |
|
| Author: | onebluguy [ Fri Dec 06, 2024 11:36 pm ] |
| Post subject: | Re: Pro angler 360 clutch stuck? |
Yes, What was the fix for this.... i bought a used hobie and got SEVERLY ripped off and never been able to use it but 1 time... guy supposedly took it to a hobie dealer to get it fixed.... now i got it back a month and half later.... and its worse than before. please help. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|