| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 360 broken wire http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=68668 |
Page 1 of 1 |
| Author: | Dennis BomBom [ Fri Jul 09, 2021 11:57 am ] |
| Post subject: | 360 broken wire |
Hi fellow kayakers. (sorry, English is not my first language) I have an issue with my 360 drive. A wire has broke and I'm not sure what part it is, so I was hoping you guys could help me out. I just realized I can't post pics here, so I'll try and explain. - It's not the one running on the Drum Idler Pulley (sorry, English is not my first language) Inside there are wires attached to the "stamp"-kinda-thing inside that cylinder in the center of the drive.. (Geez hard to explain in english) It's one of those wires that has broke, and I hope some of you can help me identify the item number. Thank you and sorry for my limited English. Have a good night. |
|
| Author: | mmiller [ Fri Jul 09, 2021 3:51 pm ] |
| Post subject: | Re: 360 broken wire |
You can not replace internal wires. They come as an assembly, so we would likely replace the drive. Contact your dealer and file a warranty claim. |
|
| Author: | Dennis BomBom [ Sat Jul 10, 2021 2:00 am ] |
| Post subject: | Re: 360 broken wire |
mmiller wrote: You can not replace internal wires. They come as an assembly, so we would likely replace the drive. Contact your dealer and file a warranty claim. Thank you very much. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|