As shown in the link above, changing the way you hold the drive can really help.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 2011 Pro Angler 14, back of mirage drive comes out http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=68938 |
Page 1 of 1 |
| Author: | Mcmurv [ Mon Aug 23, 2021 11:31 am ] |
| Post subject: | 2011 Pro Angler 14, back of mirage drive comes out |
Team, Was in my Pro angler this weekend and the back of the mirage drive kept popping out of the hole. The clamps were locked. It was like the drive was rotating in the clamps and the very back kept popping up. This ended up ripping the back fin off. |
|
| Author: | plfinch [ Mon Aug 23, 2021 1:23 pm ] |
| Post subject: | Re: 2011 Pro Angler 14, back of mirage drive comes out |
That sounds like the bolts that hold the clamps down have come loose, or there are problems underneath allowing too much flex. Any cracks or leaks at the drive well? Peter |
|
| Author: | mmiller [ Tue Aug 24, 2021 4:48 pm ] |
| Post subject: | Re: 2011 Pro Angler 14, back of mirage drive comes out |
You are likely mounting it tipped forward. https://www.hobie.com/forums/viewtopic.php?f=60&t=12836 |
|
| Author: | Mcmurv [ Thu Aug 26, 2021 11:07 am ] |
| Post subject: | Re: 2011 Pro Angler 14, back of mirage drive comes out |
mmiller wrote: Matt, Thank you sir! This is probably spot on. The water was super rough on Lake Michigan, probably the roughest I have been out in, so even though I pulled the drive in and out several times, it was near impossible to get it in level. Respectfully, Vance |
|
| Author: | mmiller [ Fri Aug 27, 2021 9:22 am ] |
| Post subject: | Re: 2011 Pro Angler 14, back of mirage drive comes out |
As shown in the link above, changing the way you hold the drive can really help.
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|