| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Hobie PA12 360 Mirage Drive Kick-up Fin Problem http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=69438 |
Page 1 of 1 |
| Author: | brettg2309 [ Wed Jan 19, 2022 5:39 pm ] |
| Post subject: | Hobie PA12 360 Mirage Drive Kick-up Fin Problem |
Hello, The front fin on my MD360 is not going all the way back into place properly after kicking up. What can I do to fix this problem? Thanks |
|
| Author: | Jbernier [ Thu Jan 20, 2022 10:00 am ] |
| Post subject: | Re: Hobie PA12 360 Mirage Drive Kick-up Fin Problem |
brettg2309 wrote: Hello, The front fin on my MD360 is not going all the way back into place properly after kicking up. What can I do to fix this problem? Thanks Contact your dealer - assuming that the nose cone is worn - if they kick up a lot in your area running shallows and impacting obstacles a lot - or the water has a lot of grit, the latch will wear - it's a very inexpensive part to replace - part number is 80151060 $9.99 each |
|
| Author: | brettg2309 [ Fri Jan 21, 2022 4:14 pm ] |
| Post subject: | Re: Hobie PA12 360 Mirage Drive Kick-up Fin Problem |
Thanks very much for your reply. I will buy one and see if that fixes the problem and let you know. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|