| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Missing paddle drive mount http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=69992 |
Page 1 of 1 |
| Author: | buddyb03 [ Mon Jul 04, 2022 6:45 am ] |
| Post subject: | Missing paddle drive mount |
Newbie here. Don’t know proper name, but I am completely missing the piece that attaches to the body of the kayak that holds the drive in place. There is one on the port side, held by three screws, and has a gear to mesh with the drive as the drive is inserted into position. The starboard one is in the drink somewhere!? Can I obtain that part. And what is it called? Any help appreciated.Hobie Pro Angler 12 foot Buddyb03 from SW Michigan |
|
| Author: | Dr.SteelheadCatcher [ Thu Jul 07, 2022 6:14 am ] |
| Post subject: | Re: Missing paddle drive mount |
It sounds like you are missing the right click and go bracket in the mirage drive well. The P/N for the right side is 81611201 and the Allen head SS screws are P/N 8030791. You should also purchase a 3/16" Allen-Ball-end wrench from your hardware store so you can secure the screws and not lose another click and go mount. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|