| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 360 Mirage drive roller bearings fall out http://www.hobie.com/au/en/forums/viewtopic.php?f=78&t=71617 |
Page 1 of 1 |
| Author: | Gummi [ Sat Aug 17, 2024 4:03 pm ] |
| Post subject: | 360 Mirage drive roller bearings fall out |
Hello When I was out at the weekend, it sometimes creaked when I pedaled, When I lifted the pedals and turned them upside down these pegs fell out, The pedals work as before, but a little now and then they possibly become a little slower and it creaks in them and then just pedal on. What do these sticks do? Can you still hit the sea and not get stranded? Something you can fix yourself or need to send away? https://drive.google.com/file/d/1DazzGZ ... sp=sharing |
|
| Author: | mmiller [ Sun Aug 18, 2024 3:24 pm ] |
| Post subject: | Re: 360 Mirage drive small pegs fall out |
They are roller bearings. Yes, you would need them for the drive to work properly. |
|
| Author: | bacco1969 [ Sun Aug 18, 2024 5:39 pm ] |
| Post subject: | Re: 360 Mirage drive small pegs fall out |
Had the same issue today, about 12 of these pins did fall out, is this bearing an orderable part. I cannot find anything online. Even a new drive is sold out anywhere. |
|
| Author: | mmiller [ Mon Aug 19, 2024 12:01 pm ] |
| Post subject: | Re: 360 Mirage drive small pegs fall out |
Older 360 Drives? Changes were made to prevent this. Have your dealer review it with the warranty/tech manager. |
|
| Author: | Gummi [ Sat Aug 24, 2024 12:55 am ] |
| Post subject: | Re: 360 Mirage drive small pegs fall out |
mmiller wrote: Older 360 Drives? Changes were made to prevent this. Have your dealer review it with the warranty/tech manager. thx for all replys, yes, its the fort 360 modell that came out, and I live in sweden and have been in contact with Kayakstore.se for support, but got a short answer from them their answers: (google translate to eng) Quote: Hi Thomas! The Mirage drive 360 is a closed system and unfortunately we do not perform repairs on that drive. Sorry we can't help you.. etc Philippa Is there any blueprint were this pins located and like Bacco1969 ask,, were to buy this pins. find them for 180 system,, but not 360 Because I dont know if I have warranty or not I dont want to start screwing apart the drive yet 
|
|
| Author: | dgmanny [ Sat Aug 31, 2024 10:58 am ] |
| Post subject: | Re: 360 Mirage drive roller bearings fall out |
Hi, If you get stuck and the warranty service isn't helping you might try purchasing some other model roller bearings to see if they have the same diameter and you can cut them down if they are too long. They are rather inexpensive. https://www.mariner-sails.com/hobie-rol ... aring.html https://ramseyoutdoor.com/products/repl ... fd_Wh5C1gU |
|
| Author: | dgmanny [ Mon Sep 02, 2024 4:27 am ] |
| Post subject: | Re: 360 Mirage drive roller bearings fall out |
If you are able to locate the bearings, I figured out a way to put them back in and reinstall the fin unit without driving yourself nuts. i used a piece of scotch tape on the spindle to hold the bearings to the spindle. |
|
| Author: | MilesPrower [ Wed Oct 30, 2024 4:59 pm ] |
| Post subject: | Re: 360 Mirage drive roller bearings fall out |
dgmanny wrote: If you are able to locate the bearings, I figured out a way to put them back in and reinstall the fin unit without driving yourself nuts. i used a piece of scotch tape on the spindle to hold the bearings to the spindle. Hi dgmanny, I landed here after I experienced two roller bearings falling out of my 360 drive unit. Can you post a description of how you put them back in? Thanks! |
|
| Author: | waylonh [ Tue Dec 03, 2024 8:06 pm ] |
| Post subject: | Re: 360 Mirage drive roller bearings fall out |
Same problem here, and per the below video, there's an upgrade to 1/4 pin bearings. This upgrade requires the parts listed below. Sprocket Rotator is easy to find but the 1/4" x 1" roller bearings are nowhere to be found. I'm thinking of finding 1/4" carbon rods and cutting them down. 80151162 ROLLER BEARING 1/4" X 1" (34 Needed but you should buy some extras) 80151061 SPROCKET ROTATOR 360 (1 Needed) |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|