| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Comp-tip http://www.hobie.com/au/en/forums/viewtopic.php?f=9&t=13244 |
Page 1 of 1 |
| Author: | spinfly [ Sun Jul 26, 2009 7:13 pm ] |
| Post subject: | Comp-tip |
Hi, all am wondering how to remove comp-tip from a Hobie H14 the mast bent and is it possible to remove the comp-tip from this or not.Anyhelp would be appreciated,Thanks ahead of time. |
|
| Author: | fastcat [ Mon Jul 27, 2009 12:35 pm ] |
| Post subject: | Re: Comp-tip |
Yes you can. Drill out the old rivets holding the comptip, Tang and aluminum mast head together. Use a heatgun and heat up the aluminum mast just below the comptip and with the aluminum mast anchored to something (or with the help of another), pull the comp tip out. A little wiggling may be needed. At least that is the way I did it for my H17 
|
|
| Author: | centralmichigansailor [ Tue Jul 28, 2009 12:39 am ] |
| Post subject: | Re: Comp-tip |
Wrong spot for this posting but I have a clear anodized uncut H14 mast a couple hours away from TC if you are interested for $200. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|