| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Help with Sail identification! http://www.hobie.com/au/en/forums/viewtopic.php?f=9&t=36977 |
Page 1 of 1 |
| Author: | mantaray [ Fri Jul 22, 2011 7:22 pm ] |
| Post subject: | Help with Sail identification! |
So, I bought a H16 today for $500 mainly because it had a spinnaker sail. None of the sails are H16 sails however and I'm trying to ID them. Here are the dimensions. Anyone got any ideas? Spinnaker: Neil Pryde, bag says its .75 oz Nylon Foot = 12' Luff = 26' Leech = 21.5' 
|
|
| Author: | mantaray [ Thu Jul 28, 2011 9:55 am ] |
| Post subject: | Re: Help with Sail identification! |
Ok, since I am clueless about the origin of the spinnaker, the more important question is: Will it work on my H16? |
|
| Author: | mmiller [ Thu Jul 28, 2011 1:04 pm ] |
| Post subject: | Re: Help with Sail identification! |
The mast is 26', so a 26' luff is a bit too big. The stock 16 spinnaker has a luff of 21.5' |
|
| Author: | mantaray [ Fri Jul 29, 2011 8:42 am ] |
| Post subject: | Re: Help with Sail identification! |
Thanks for the help. So, I guess this spinnaker would be more suited to a H17 or H18, huh? What are the measurements for spinnakers for those boats? |
|
| Author: | mmiller [ Fri Jul 29, 2011 8:45 am ] |
| Post subject: | Re: Help with Sail identification! |
I don't have a spec for the 17. The H18 uses a 25.3' Luff |
|
| Author: | jmecky [ Fri Jul 29, 2011 11:30 am ] |
| Post subject: | Re: Help with Sail identification! |
If you don't want that spinnaker Ill buy it, hows 100$ sound? |
|
| Author: | mantaray [ Fri Jul 29, 2011 1:43 pm ] |
| Post subject: | Re: Help with Sail identification! |
$100 seems a little cheap. It looks like it has never been used. I'll take some pictures tonight and post them. How much would a new H18 spinnaker cost? I put an ad in the classifieds section. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|