| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| would these bee a good idea to use as bow hull cradles http://www.hobie.com/au/en/forums/viewtopic.php?f=9&t=4193 |
Page 1 of 1 |
| Author: | splash [ Sun Jul 16, 2006 11:46 am ] |
| Post subject: | would these bee a good idea to use as bow hull cradles |
would these bee a good idea to use as bow hull cradles on my trailer? Can you see any problems? fors or against´s? http://shop.easternmarine.com/index.cfm?fuseaction=catalog.prodInfo&productID=4856&categoryID=202 |
|
| Author: | Hobie Nick [ Mon Jul 17, 2006 9:16 am ] |
| Post subject: | |
I would be a little nervous they wouldn't be sturdy enough. Typically you will see a V-roller with a post on the inside of the hulls. The post will either have a small roller on it or it will support a treated 2x4 that has outdoor carpet on it. The post will support any major side to side loads and the v- roller will support the weight of the bows and allow for a snug tie down.. The bow stop isn't really meant to support the weight of a boat. Not is it meant to have the load dragged across it. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|