| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| How do you remove old rail neoprene? http://www.hobie.com/au/en/forums/viewtopic.php?f=9&t=4427 |
Page 1 of 1 |
| Author: | Skipshot [ Thu Aug 03, 2006 10:03 pm ] |
| Post subject: | How do you remove old rail neoprene? |
The neoprene on the rails of my 18 is old and tattered, so I'm considering replacing it. How do I get the old stuff off? |
|
| Author: | ncmbm [ Fri Aug 04, 2006 6:07 am ] |
| Post subject: | |
I pull it off as best I can and then remove the residue with 3m glue and wax remover. Clean with alcohol and then reapply contact cement. Can use a razor blade but be careful. |
|
| Author: | hobie1616 [ Fri Aug 04, 2006 7:48 pm ] |
| Post subject: | |
3M makes an adhesive remover. I've had very good results with Oops. I found it at Ace Hardware. |
|
| Author: | DougHobie17 [ Fri Aug 04, 2006 8:36 pm ] |
| Post subject: | Gluing thin non skid to mesh wings |
Matt: What is the best to glue black thin non skid to Sunrise mesh tramp wings. I have tried contact cement and 3M Adhesive. My only other thought is taking wings apart and taking he to a sailmaker to remove stitching, stitch it on and restitch seam. Any thoughts? Doug |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|