| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Seaway cam cleat springs http://www.hobie.com/au/en/forums/viewtopic.php?f=9&t=529 |
Page 1 of 1 |
| Author: | turbofan [ Mon Oct 13, 2003 3:34 pm ] |
| Post subject: | Seaway cam cleat springs |
Does any one out there know if springs for the old style Seaway cam cleats are still available? Hobie dealers used to sell packs of them, but I haven't seen them in years. I just used up the last of my spares , and sooner or later another will wear out! Thanks, Dave |
|
| Author: | Rick W [ Fri Jun 12, 2009 9:20 am ] |
| Post subject: | Re: Seaway cam cleat springs |
Dave, This is going back many years, but did you ever find those springs for the SeaWay cam cleats? Thanks Rick |
|
| Author: | Sail Revolution [ Fri Jun 12, 2009 10:49 am ] |
| Post subject: | Re: Seaway cam cleat springs |
Unfortunately, they are not available. Might be time to upgrade to Ronstan or Harken. J |
|
| Author: | Rick W [ Sat Jun 13, 2009 11:32 am ] |
| Post subject: | Re: Seaway cam cleat springs |
Thanks J. However I'm having a hard time finding cam cleats with the 1.75" spread that the Seaways had. Any ideas? Rick |
|
| Author: | Sail Revolution [ Sat Jun 13, 2009 12:43 pm ] |
| Post subject: | Re: Seaway cam cleat springs |
Rick W wrote: Thanks J. However I'm having a hard time finding cam cleats with the 1.75" spread that the Seaways had. Any ideas? Rick Hobie Part 50010 is an adapter plate that will convert the seaway spacing to standard Ronstan/ Harken. Available from any Hobie dealer.  Hope that helps! Sail on! J |
|
| Author: | Rick W [ Sat Jun 13, 2009 5:47 pm ] |
| Post subject: | Re: Seaway cam cleat springs |
Thanks very much. Rick |
|
| Author: | JohnMcBride [ Tue Jun 16, 2009 6:47 pm ] |
| Post subject: | Re: Seaway cam cleat springs |
I may have a cam and spring rebuild kit for the old seaways. Email me if you need them. johnjennifer_dot_mcbride_at_gmail.com |
|
| Author: | turbofan [ Wed Jun 17, 2009 3:53 pm ] |
| Post subject: | Re: Seaway cam cleat springs |
Rick- I guess the post kind of answered itself! In the years since, I finally wore out another which prompted me to retrofit to Harken cleats.... Ah, buying a new boat- piece by piece! Dave |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|