There is a more recent version that is even stronger. Machined head, not hammered. Rolled threads and high strength stainless.
20100000 ANCHOR PIN
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Updated Shroud Anchor Bolt http://www.hobie.com/au/en/forums/viewtopic.php?f=9&t=67623 |
Page 1 of 1 |
| Author: | srm [ Fri Nov 13, 2020 6:20 pm ] |
| Post subject: | Updated Shroud Anchor Bolt |
Was just browsing Murrays website and noticed they now offer an updated shroud anchor bolt. Looks like this is a Hobie part (No. 50-20100000-1). Any details? Stronger than the previous version? Any other advantages? https://www.murrays.com/product/shroud-anchor-pin-h16-17-18-updated/# sm |
|
| Author: | Rich McVeigh [ Sat Nov 14, 2020 6:26 am ] |
| Post subject: | Re: Updated Shroud Anchor Bolt |
I have the newer version on my boat and certainly look more substantial than the older style. I am still giving them frequent inspection and changing them out for new every three years |
|
| Author: | srm [ Thu Nov 19, 2020 4:27 am ] |
| Post subject: | Re: Updated Shroud Anchor Bolt |
Interesting, thanks. I know Hobie updated the bolts a few years ago, claiming that the new manufacturing process made them significantly stronger (rolled threads instead of machined). Wondering if they would make any similar claims about these new bolts. The failure point of the bolts tends to be on the shank at the transition between the threaded and un-threaded sections. Not sure how any improvements could be made there since they are limited by the thread size. Maybe changing to a stronger alloy stainless? sm |
|
| Author: | mmiller [ Thu Nov 19, 2020 12:22 pm ] |
| Post subject: | Re: Updated Shroud Anchor Bolt |
There is a more recent version that is even stronger. Machined head, not hammered. Rolled threads and high strength stainless. 20100000 ANCHOR PIN |
|
| Author: | Dookie [ Mon Nov 23, 2020 11:30 am ] |
| Post subject: | Re: Updated Shroud Anchor Bolt |
Matt, when was this change made? Thanks, Daniel |
|
| Author: | mmiller [ Mon Nov 23, 2020 12:13 pm ] |
| Post subject: | Re: Updated Shroud Anchor Bolt |
About a year ago. Just prior to the 16 Worlds as I recall. |
|
| Author: | Tim H16 [ Tue Nov 24, 2020 8:03 am ] |
| Post subject: | Re: Updated Shroud Anchor Bolt |
When the shroud anchor bolt was upgraded was the shroud anchor bar also upgraded? Or is the anchor bar less likely to fail? |
|
| Author: | mmiller [ Tue Nov 24, 2020 9:52 am ] |
| Post subject: | Re: Updated Shroud Anchor Bolt |
Bars don't fail. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|