| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Whats this part called http://www.hobie.com/au/en/forums/viewtopic.php?f=9&t=67949 |
Page 1 of 1 |
| Author: | ianganderton [ Tue Mar 02, 2021 12:15 pm ] |
| Post subject: | Whats this part called |
Hi folks, I'm looking to order the parts needed to attach my 6:1 downhaul to the mast luff track  The small image is taken from here https://www.murrays.com/product/07-2089-1/ The problem is I'm a newbie and don't know what its called  - can anyone help outI could use a saddle but it wouldn't be as neat. I would just go to a chandlers but we are in L3 lockdown here in Auckland so I'm stuck with the internet |
|
| Author: | mmiller [ Tue Mar 02, 2021 12:32 pm ] |
| Post subject: | Re: Whats this part called |
11870000 Traveler Deck Plate  When you get one, bend one end down a bit, file a notch in the luff track to match the bend positioned at the top. Then tighten in place. The screws alone are not enough to hold it in position, so the notch and bent part locks it in place. |
|
| Author: | ianganderton [ Tue Mar 02, 2021 6:41 pm ] |
| Post subject: | Re: Whats this part called |
mmiller wrote: 11870000 Traveler Deck Plate When you get one, bend one end down a bit, file a notch in the luff track to match the bend positioned at the top. Then tighten in place. The screws alone are not enough to hold it in position, so the notch and bent part locks it in place. Awesome, thanks. Just picked one up from Dan @ The Watershed here in Auckland Appreciate the installation tip too, much appreciated. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|