the aft hanger worked best for me. it allowed for some rotation control
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| What BLOCK HANGER to use http://www.hobie.com/au/en/forums/viewtopic.php?f=9&t=7238 |
Page 1 of 1 |
| Author: | splash [ Tue Jul 10, 2007 1:41 am ] |
| Post subject: | What BLOCK HANGER to use |
I just upgraded my seaway blobks to a 6:1 Harken stetup with a 2605 BLK-57MM CARBO TRPL W/BKT Description Triple/swivel/becket Where would you fix it....I´m using the middle block hanger...and the main sheet does not seem very vertical...more like inclined aft... Thanks |
|
| Author: | mmiller [ Tue Jul 10, 2007 8:46 am ] |
| Post subject: | Block hanger |
The sheets should angle aft to give compression force forward against the mast to hold the mast in rotation. |
|
| Author: | Skipshot [ Tue Jul 10, 2007 11:32 pm ] |
| Post subject: | |
The middle of three hangers on my 18 is bent likely because of too much pressure, so I've moved to the hanger closest to the rear cross bar.[/i] |
|
| Author: | ncmbm [ Thu Jul 12, 2007 8:53 am ] |
| Post subject: | |
I use the middle hanger on my 18 boom and took the others off. Kept hitting them with my head or hanging them on the harness/jacket. |
|
| Author: | t page [ Thu Jul 12, 2007 2:52 pm ] |
| Post subject: | |
the aft hanger worked best for me. it allowed for some rotation control
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|