Return to Hobie.com
Hobie Forums
It is currently Sat Jul 20, 2019 9:47 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Fri Dec 28, 2018 9:06 pm 
Offline
Site Rank - Captain

Joined: Fri Jul 13, 2018 9:01 am
Posts: 97
Location: Near Austin, TX
Doubt there is one for this situation. I believe this is one side of a 2-part Hobie Kayak paddle. Is there a T-Handle that will fit it? If not then I guess I'll try to make one from PVC.



Thanks,

_________________
Thank you,
Roy Niswanger


Top
 Profile  
 
PostPosted: Wed Jan 09, 2019 5:35 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 12875
Location: Oceanside, California
Only available for the female half.

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
PostPosted: Fri Jan 11, 2019 7:11 am 
Offline
Site Rank - Captain

Joined: Fri Jul 13, 2018 9:01 am
Posts: 97
Location: Near Austin, TX
mmiller wrote:
Only available for the female half.


That's what I figured Matt, thank you. I used some 1" PVC that I turned out the inside slightly on a wood lathe to glue and fit snug on the paddle, then 3/4" piece to reduce it, again turning so the 3/4" fit into the 1" and then a 3/4" tee that I cut down so the tee wasn't so wide. finished it all with large heat shrink.

Image

_________________
Thank you,
Roy Niswanger


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group