| Hobie Forums http://www.hobie.com/forums/ |
|
| Two Hullavators - How wide? http://www.hobie.com/forums/viewtopic.php?f=11&t=43764 |
Page 1 of 1 |
| Author: | John_h [ Mon Jul 09, 2012 3:12 am ] |
| Post subject: | Two Hullavators - How wide? |
Does anyone know what the minimum width roof rack bars would need to be to fit two Hullavators on? I'm looking to fit an Outfitter and an Adventure Island (not assembled) on the roof of my ix35. |
|
| Author: | 65Strad [ Mon Jul 09, 2012 3:21 pm ] |
| Post subject: | Re: Two Hullavators - How wide? |
If there is a minimum width for the Hullavator but if there is, Thule will be able to tell you. I have the Hullavator on my VW GTI and the racks (front and rear) are exactly 28" apart and the rack, Hullavator, and my Oasis 14'6" are rock solid. I'm not sure if that is what you mean by minimum width, but I do know that you cAn have Hullavators on both side of your vehicle. My dealer suggested, and I got 58" crossbar's which allow proper clearance from the Hullavator cradles from the car when lowered. I could also put another Hullavator on the drivers side if I had the need. Hope that helps. |
|
| Author: | Eddy G [ Tue Jul 10, 2012 6:14 am ] |
| Post subject: | Re: Two Hullavators - How wide? |
Tom, are you saying, that you could put another H rack on your car and car two yaks at the same time? |
|
| Author: | Pedalpusher [ Thu Jul 12, 2012 1:05 pm ] |
| Post subject: | Re: Two Hullavators - How wide? |
My Yakima bars are 78 inches for two Hullavators with two Outbacks on a huge Ford truck canopy. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|