Hobie Forums http://www.hobie.com/forums/ |
|
THREADED NUT ON FIN TURBO FINS http://www.hobie.com/forums/viewtopic.php?f=11&t=44722 |
Page 1 of 1 |
Author: | rubone47 [ Tue Aug 28, 2012 5:02 pm ] |
Post subject: | THREADED NUT ON FIN TURBO FINS |
The threader brass nut on the fins. What is the purpose for this nut (IS IT FOR A ADJUSTMENT) and if it is does anybody adjust it and if you do for what purpose. |
Author: | KayakingBob [ Tue Aug 28, 2012 5:34 pm ] |
Post subject: | Re: THREADED NUT ON FIN TURBO FINS |
Try this: http://www.hobiecat.com/forums/viewtopic.php?f=60&t=12578 |
Author: | rubone47 [ Fri Aug 31, 2012 5:31 pm ] |
Post subject: | Re: THREADED NUT ON FIN TURBO FINS |
sorry for reasking but is this adjustment for anything |
Author: | KayakingBob [ Fri Aug 31, 2012 5:55 pm ] |
Post subject: | Re: THREADED NUT ON FIN TURBO FINS |
If you click on the link I posted above (now fixed) it will bring you to a forum post by Roadrunner completely explaining what it is, and how to adjust it. |
Author: | Chaz [ Fri Aug 31, 2012 10:46 pm ] |
Post subject: | Re: THREADED NUT ON FIN TURBO FINS |
KayakingBob wrote: If you click on the link I posted above (now fixed) it will bring you to a forum post by Roadrunner completely explaining what it is, and how to adjust it. I looked at that link and did not see anything explaining the brass adjustment nut and how to properly determine the settings. |
Author: | KayakingBob [ Fri Aug 31, 2012 11:16 pm ] |
Post subject: | Re: THREADED NUT ON FIN TURBO FINS |
You're right! not all the detail I thought was there. Try this one: http://www.hobiecat.com/forums/viewtopic.php?f=11&t=17027 The first post with a picture should do it. |
Author: | RockyRaab [ Sun Sep 02, 2012 8:34 am ] |
Post subject: | Re: THREADED NUT ON FIN TURBO FINS |
I also have that annoying "click." I read somewhere that adjusting that brass nut so the trailing edge of the fin is just barely inside the groove gives better performance. Don't know if that's true, but that's when the clicking started. I think I'll go play with my clew outhaul. (Sounds a bit risque, doesn't it?) |
Author: | RockyRaab [ Sun Sep 02, 2012 3:25 pm ] |
Post subject: | Re: THREADED NUT ON FIN TURBO FINS |
Yup. I get the concept: It's like going to fine pitch on your prop for takeoff versus for cruise in an aircraft. The last picture is just how I have mine adjusted - and get the click. I may still play with it a bit to see what the best compromise is. Thanks a lot. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |