| Hobie Forums http://www.hobie.com/forums/ |
|
| Outback cradles http://www.hobie.com/forums/viewtopic.php?f=11&t=45163 |
Page 1 of 1 |
| Author: | knowltoh [ Wed Sep 26, 2012 7:53 pm ] |
| Post subject: | Outback cradles |
Is anyone aware of a cradle set that will work for an Outback? Something like the cradles available for the PA. I want to be able to store the kayak on the trailer. Thanks, Herb |
|
| Author: | Drewyaker [ Wed Sep 26, 2012 8:15 pm ] |
| Post subject: | Re: Outback cradles |
Hobie recommends storing up side down but you could use 2 lengths of 4" pvc longways. It will bend to the hull and evenly distribute the weight. |
|
| Author: | Revo_1756 [ Thu Sep 27, 2012 2:13 pm ] |
| Post subject: | Re: Outback cradles |
The Yakima Land Shark saddles should work. The come in pairs and you can set them apart or as close as you need to support the kayak. I know the outback has a bit of a keel but should not be too deep for the saddles. I carry two revolutions upright on them and they are several inches above the bars. http://www.rackattack.com/product-pages ... nAoddXEAcA They are also the least expensive of the kayak saddles. Download the instruction manaul pdf here to see all the info on them http://assets.yakima.com/resource/produ ... structions Revo |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|