Return to
Hobie Forums
It is currently Tue Jun 25, 2019 9:50 pm

All times are UTC - 8 hours [ DST ]

Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Mon Feb 22, 2016 7:35 pm 
Site Rank - Deck Hand

Joined: Mon Feb 22, 2016 7:26 pm
Posts: 1
Looking for a replacement seat for a 2008 Revo 13. After searching the internet I'm very confused on what my options are. What is the part number for the original? I purchased a used one without a seat. Thank you.

PostPosted: Thu Mar 03, 2016 2:22 pm 
Site Rank - Old Salt

Joined: Fri Jun 06, 2008 1:53 pm
Posts: 395
Location: S.E. Florida
I have the 2008 revolution 13. I have swapped out the original seat for a Skwoosh high back seat. Far more comfortable and more back support.
The original seat has pegs that hold the seat pad in place but the Skwoosh has two straps. Add 2 padeyes behind the seat next to the loops that you clip the well bungee on. You can use the well bungee clip ring too but you have to use one or the other on the ring. I chose to add the padeyes for the Skwoosh clips. The seat stays in place no problem without the pegs.

Contact your local Hobie Dealer and see if you can still get the old version of Hobie Seat pre 2010. They changed the peg holes in the 2010 models. I have a 2010 revolution 13 also and use the Skwoosh seat in it too.

I hope this has been helpful.


I would rather be kayaking and think about work than to be at work thinking about kayaking.
A Thrill Ride is being dragged around in your kayak for 40 minutes by an extremely large fish.

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group