Return to Hobie.com

Hobie Forums

It is currently Tue Oct 16, 2018 8:55 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Wed Apr 11, 2018 8:09 am 
Offline
Site Rank - Deck Hand

Joined: Mon Apr 24, 2017 9:41 am
Posts: 2
I am looking for suggestions for plastic material and color matching tips/tricks for soldering screw holes in my Orange Mirage Outback. I had a long H-Rail on there, but am taking it off, shortening it, and installing a Boone Dox. There are now 2 big screw holes from the H-Rail that I need to fill in. I do have a soldering iron and have seen some videos on how to patch the holes, but wanted some input on the material to use and how to try to color match. I was actually recommended from the Hobie Facebook group to reach out in the forums to see if anyone had suggestions for me. Thanks!


Top
 Profile  
 
PostPosted: Wed Apr 11, 2018 5:24 pm 
Offline
Hobie Approved Guru

Joined: Sat Nov 12, 2005 10:46 pm
Posts: 2893
Location: Escondido
There are a couple of options. Hobie currently has plastic welding rod available at no charge in the various colors. It can be requested through your local dealer (who may or may not know about it). Otherwise or until then, you can just put screws in the holes with a dab of clear silicone calk to seal them (optional). This will make them look neat and keep the holes available for some possible future use!

If you're welding holes, you can use any matching plastic strip (about 1/8" across). Melt the tip with a lighter and dab it into the hole; quickly flatten it out with a putty knife or flat blade. Practice first till you get the hang of it! 8)

PS: When ordering the free welding rod, provide the year model as well as the color for best color match. The colors change slightly over the years so an exact match is not always possible. They can at least get you close to your original color.


Last edited by Roadrunner on Thu Apr 12, 2018 10:12 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Thu Apr 12, 2018 9:54 am 
Offline
Hobie Fish Tech / Moderator

Joined: Wed May 11, 2016 8:20 am
Posts: 402
Here's the KC Plastic weld tool:

Image

72097001
KC WELDER PRO WITH ROD STOCK

_________________
Howie Strech
Associate Product Manager - Fishing Accessories
Hobie Cat USA


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group