Hobie Forums http://www.hobie.com/forums/ |
|
Using Hobie PA Paddle Clip Assemblies on 2016+ Oasis http://www.hobie.com/forums/viewtopic.php?f=11&t=62746 |
Page 1 of 1 |
Author: | plfinch [ Fri May 18, 2018 6:50 pm ] |
Post subject: | Using Hobie PA Paddle Clip Assemblies on 2016+ Oasis |
While customizing the sail furling kit for my Oasis I used open pully blocks mounted where the port paddle bungee goes. I knew this would prevent use of the bungee but already planned on adding the PA Paddle Clip Assembly to hold the paddle - I really don’t like the bungees. I also have an H-rail on the starboard side which makes that bungee a little hard to secure. After installing the paddle clips on the port side, and liking them so much, I put another set on the other side. They work perfectly. Peter |
Author: | winfield100 [ Sat Aug 29, 2020 2:53 pm ] |
Post subject: | Re: Using Hobie PA Paddle Clip Assemblies on 2016+ Oasis |
plfinch wrote: While customizing the sail furling kit for my Oasis I used open pully blocks mounted where the port paddle bungee goes. I knew this would prevent use of the bungee but already planned on adding the PA Paddle Clip Assembly to hold the paddle - I really don’t like the bungees. I also have an H-rail on the starboard side which makes that bungee a little hard to secure. After installing the paddle clips on the port side, and liking them so much, I put another set on the other side. They work perfectly. Peter What is the compass and where from please |
Author: | plfinch [ Sat Aug 29, 2020 4:53 pm ] |
Post subject: | Re: Using Hobie PA Paddle Clip Assemblies on 2016+ Oasis |
Ritchie XP-99W. https://www.amazon.com/gp/product/B002LVJB92 I absolutely love it. And in hundreds of miles of kayaking that position on my round hatch has never been an issue or inconvenience. Peter |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |