Hobie Forums http://www.hobie.com/forums/ |
|
Mirage classic rudder parts/install http://www.hobie.com/forums/viewtopic.php?f=11&t=63238 |
Page 1 of 1 |
Author: | Friedchickenfuelsme [ Wed Jul 18, 2018 2:22 pm ] |
Post subject: | Mirage classic rudder parts/install |
I got a mirage classic for a really good deal but doesn’t have rudder or mirage drive installed. In fact, it doesn’t even have holes for the lines for the rudder. What parts do I need and what should I know about it before I start trying. What size of hole do I drill or is it easier I take it to a hobie dealer to get them drilled? |
Author: | Defy [ Wed Jul 18, 2018 3:02 pm ] |
Post subject: | Re: Mirage classic rudder parts/install |
Confused?? Does it have a hole for the drive? Sent from my iPhone using Tapatalk |
Author: | mmiller [ Wed Jul 18, 2018 3:23 pm ] |
Post subject: | Re: Mirage classic rudder parts/install |
What you have is likely what we called an "Aspire". That is a project! There are a LOT of parts required to make it a functioning Mirage kayak. A MirageDrive runs $622 for the GT standard Fin version. Rudder parts can be found in the parts diagrams here: https://cdn.hobiecat.com/digital_assets/International_Kayak_August_2018.pdf#page=60 Instructions here: https://static.hobiecat.com/digital_assets/80018.pdf Not all of parts are available in that vintage, but here is a list of what was in a kit back then... nearly 20 years ago. 80005 XXMIRAGE UPGRADE KIT: MIRAGE DRV MECHANISMXX & COMPLETE STEERING KIT W/RUDDER 2103 1.000 EA 0.000% SHOCK CORD MOUNT 2104 1.000 EA 0.000% ADJ SHOCK CORD HOOK 3/8" 80014 1.000 EA 0.000% TAG MIRAGE DRIVE 8031150 1.000 EA 0.000% SCREW #10 x 1/2 PHSMS-P 8012000 1.000 EA 0.000% RIVET ALUM BULB-TYPE 8004810 1.330 LF 0.000% SHOCKCORD 1/4" BLACK Steering 81370 1.000 EA 0.000% XXSTEERING CRANK (pre 2011)XX 8080690 3.000 EA 0.000% WASHER 3/8x3/4 NYLON-FLAT (ABA 81012 1.000 EA 0.000% XXSTEERING HANDLE-BLKXX 8010180 2.000 EA 0.000% RIVET POP 3/16x1/4 PH-SS (ABA) 53170020 1.000 EA 0.000% SCREW 1/4-20 X 1/2 SKTST (ABA) Rudder up/down control 81380 1.000 EA 0.000% CONTROL ARM - UP/DOWN 81375 1.000 EA 0.000% COMPRESSION SPRING (1) 8080690 1.000 EA 0.000% WASHER 3/8x3/4 NYLON-FLAT (ABA 81032 1.000 EA 0.000% RUDDER UP/DOWN HNDL-MFG 53170020 1.000 EA 0.000% SCREW 1/4-20 X 1/2 SKTST (ABA) Control lines 81400 14.333 LF 0.000% TUBING HI-DENSITY PE 8010130 4.000 EA 0.000% RIVET POP 3/16x3/8 PH-SS DELETE 8004830; CHANGE 81023, 53180010; ADD 8004810: ECO #04-0221. CHANGE 81400, 81023: ECO #04-0241. 81023 22.333 LF 0.000% LINE-CONTROL 700 lb GRAY 8063000 5.000 EA 0.000% SLEEVE NICROPRESS 1/16 8004810 1.333 LF 0.000% SHOCKCORD 1/4" BLACK 81390 1.000 EA 0.000% RUDDER MIRAGE (disc) 8003510 0.375 LF 0.000% DELRIN ROD .375 D X 5' BLACK 20860010 2.000 EA 0.000% LARGE KEY RING 8030170 2.000 EA 0.000% SCREW 12-24 x 3/4 RHMS-P 8080540 2.000 EA 0.000% WASHER 1/4 X 5/8 FLAT SS (ABA) Steering Line Separator 8012000 1.000 EA 0.000% RIVET ALUM BULB-TYPE 71110 1.000 EA 0.000% PAD EYE-BLK NYLON-3/8" 8030280 1.000 EA 0.000% SCREW 10-32x3/4 RHMS-P SS 8050200 1.000 EA 0.000% NUT #10-32 HEX NYLOCK Tools 53170022 1.000 EA 0.000% HEX KEY 1/8" 80215 1.000 EA 0.000% DRILL BIT.3860 "W LETTER" - MI 80115 1.000 EA 0.000% DRILL BIT 7/32" Hydrosail Mech. 80010 STD 1.000 EA 0.000% MIRAGE DRIVE-STD/PRODUCTION |
Author: | Friedchickenfuelsme [ Thu Aug 23, 2018 8:00 pm ] |
Post subject: | Re: Mirage classic rudder parts/install |
I stopped reading that parts list before my head exploded. I think I’ll just paddle it or put a MirageDrive in and steer it with my paddle. I found a fully functioning mirage classic a few months back and probably should have snapped it up and used my current one as a backup but should’a, would’a, coulda. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |