Mirage drive stuck in place due to SS pin moving

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

montaukfluker

Post subject: Mirage drive stuck in place due to SS pin moving

Posted: Wed Aug 01, 2018 6:24 am

Site Rank - Deck Hand

Joined: Wed Aug 01, 2018 6:03 am
Posts: 1

MIRAGE DRIVE PROBLEM.
The stainless steel pin that hole the fins is riding out of place by 1/4 inch which keeps the pedals stuck in place when you need to pull them out. i used wiggling and force to pop it out. i tightened the screws at top of fin but the problem continued. i tap it back in place and its fine but coming in thru the surf so its a big problem. thank you

Top

mmiller

Post subject: Re: Mirage drive stuck in place due to SS pin moving

Posted: Wed Aug 01, 2018 10:41 am

Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15035
Location: Oceanside, California

What we would call the sprocket shaft? The screw you tightened is the allen set screw? Maybe not in a detent or the spine is cracked allowing the screw to come loose? Blue loc tite?

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

Top

Page 1 of 1

[ 2 posts ]

Board index » Hobie Kayaking / Fishing » Open Forum - Kayaking

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to: