| Hobie Forums http://www.hobie.com/forums/ |
|
| 2010 TI VS 2012 TI http://www.hobie.com/forums/viewtopic.php?f=120&t=44969 |
Page 1 of 1 |
| Author: | Lomcevak [ Fri Sep 14, 2012 9:29 am ] |
| Post subject: | 2010 TI VS 2012 TI |
I am going to buy a new 2012 TI and i have also a good friend selling his 2010 TI used only about 10 times total. What are the main differences between 2010 and 2012 model ? Thanks BTW a new is 5400$ and the used is 4000, maybe less... Richard |
|
| Author: | Bcastile [ Fri Sep 21, 2012 10:49 am ] |
| Post subject: | Re: 2010 TI VS 2012 TI |
The main differences will be the seat plugs, MirageDrive alignment pins, and scupper reinforcements. Nothing else comes to mind right now. |
|
| Author: | beebrain [ Sat Mar 16, 2013 9:48 am ] |
| Post subject: | Re: 2010 TI VS 2012 TI |
Another difference is the socket screw holding the mast receiver in the bottom of the boat. This has been upgraded with stronger steel, and rolled thread construction, which both reduce chance of it breaking off (which has happened to some TI's) Actually, I am trying get help from the forums in constructing a list of modifications made to the Islands over the years, for exactly the kind of questions that started this thread. Unfortunately, this has not attracted the assistance I expected, and need. See topic http://www.hobiecat.com/forums/viewtopic.php?f=71&t=46735 |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|