Return to Hobie.com
Hobie Forums
It is currently Thu Dec 02, 2021 6:07 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: T2 Hatch Covers
PostPosted: Mon Feb 18, 2019 4:14 pm 
Offline
Site Rank - Deck Hand

Joined: Sat Nov 09, 2013 9:06 pm
Posts: 13
I cannot find the parts list for the T2 online. The link above takes me to a generic page. Word on the street is many of the Getaway parts are interchangeable with the T2, is this true.

Did find part numbers for a Getaway hatch, #41370001, 5" hatch. Could that be used as a T2 replacement?


Top
 Profile  
 
 Post subject: Re: T2 Hatch Covers
PostPosted: Mon Feb 18, 2019 4:36 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 14566
Location: Oceanside, California
Correct. 40370001

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
 Post subject: Re: T2 Hatch Covers
PostPosted: Thu Feb 21, 2019 11:35 am 
Offline
Site Rank - Deck Hand

Joined: Sat Nov 09, 2013 9:06 pm
Posts: 13
Thanks Matt.


Top
 Profile  
 
 Post subject: Re: T2 Hatch Covers
PostPosted: Thu Nov 11, 2021 4:06 pm 
Offline
Site Rank - Deck Hand

Joined: Mon Jun 11, 2018 4:07 pm
Posts: 12
Matt:

I am looking at a T2 but I am worried about parts. Are any or some or all inter-changeable with a H16 or the Getaway. I like the boat but I am concerned about getting replacement parts. I assume shrouds, sails and tramp can be bought at after market companies with no problem but what about a mast or something that is harder to replace?


Top
 Profile  
 
 Post subject: Re: T2 Hatch Covers
PostPosted: Thu Nov 11, 2021 10:00 pm 
Offline
Site Rank - Captain

Joined: Thu Sep 12, 2013 11:34 am
Posts: 72
Here's what I believe is correct:
T2 specific parts:
Hulls
Trampoline
Sails

Other parts are from a mix of boats:
Mast - H16 (with different base and mast head)
Crossbars - F18 Tiger/Wildcat (probably T2 specific width and fittings)
Rudders - standard EZ LOC (probably T2 specific rudder arms)

Everything else is pretty generic or easily replaceable. I saw there are aftermarket tramps being made. Sails could probably be custom made if needed. So really, the big risk is the hulls themselves. My experience so far is they are tough as nails.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group