Hobie Forums http://www.hobie.com/forums/ |
|
Squaretop Main w/8:downhaul --metal luff track on comptip? http://www.hobie.com/forums/viewtopic.php?f=13&t=38508 |
Page 1 of 1 |
Author: | RobPatt [ Thu Sep 15, 2011 11:49 am ] |
Post subject: | Squaretop Main w/8:downhaul --metal luff track on comptip? |
anyone w/the whirlwind fathead see the need for the metal sailtrack insert you can put up at the top of the comptip? I'm doing 4:1 cascade to 8:1 downhaul & wondering if it's worth pulling the hook assy from the comptip to install the metal sail track section (it's about 12 inches if I recall...) sitting in my spares box. Thanks... -Rob |
Author: | ncmbm [ Thu Sep 15, 2011 12:19 pm ] |
Post subject: | Re: Squaretop Main w/8:downhaul --metal luff track on compti |
I have one on my mast but not sure it is needed. The pinhead sails would pull out but Whirlwind sails seem to have a thicker bolt rope which stays put. The aluminum piece sort of snaps on. You have to remove and cut your plastic track to size(which also snaps on). Be careful removing it as you can damage the tip. It goes on way easier than it comes off!! If the sail pulls out add it, if not leave it as is. Worst case you will have to pull a pinched sail down, its not going to damage anything unless its a nuclear wind day! |
Author: | RobPatt [ Fri Sep 16, 2011 8:34 am ] |
Post subject: | Re: Squaretop Main w/8:downhaul --metal luff track on compti |
cool, thanks.... we'll give it a go as is. boat is in pieces in the yard, mast on the grass so if I'm going to do it, now's a good time... will wait and see how goes w/o it... |
Author: | rehmbo [ Fri Sep 16, 2011 9:42 am ] |
Post subject: | Re: Squaretop Main w/8:downhaul --metal luff track on compti |
Is the comp tip able to support the square top main properly? How is the twist off? |
Author: | RobPatt [ Fri Sep 16, 2011 2:04 pm ] |
Post subject: | Re: Squaretop Main w/8:downhaul --metal luff track on compti |
can't say personally, but a fair amount of folks are thrilled w/it: viewtopic.php?f=13&t=37278&p=152417&hilit=squaretop#p152417 viewtopic.php?f=13&t=36555&hilit=squaretop viewtopic.php?f=13&t=36183&p=147190&hilit=squaretop#p147190 but agree the solid stick is a better choice.. if you have the choice.... cheers... |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |