Hobie Forums
http://www.hobie.com/forums/

top of forestay swivel
http://www.hobie.com/forums/viewtopic.php?f=13&t=45159
Page 1 of 1

Author:  dja [ Wed Sep 26, 2012 5:55 pm ]
Post subject:  top of forestay swivel

Is there a history of the swivel at the top of the jib forestay wearing out to the point that the jib becomes difficult to unfurl, especially the last foot or so? The boat is 26 years old and only in fresh water. Any thoughts? PS... It's a h18......Thanks, in advance...DJ

Author:  RobPatt [ Thu Sep 27, 2012 12:07 pm ]
Post subject:  Re: top of forestay swivel

no history... thing is bulletproof.

1. clean and lube it.
2. make sure the furler line is free to run up around the furler and not caught or tangled
3. release mainsheet tension before trying to unfurl.
4. foot off a bit if doing so while sailing...

Author:  musicman [ Thu Sep 27, 2012 6:14 pm ]
Post subject:  Re: top of forestay swivel

you may also need to redo your furler at the bridle.. there is a kit with new bearings/ washers etc .... makes a big difference also,.. just did mine...

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/