H-18 Anchor Plates

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

DVL

Post subject: H-18 Anchor Plates

Posted: Sun Oct 26, 2003 4:34 am

Site Rank - Old Salt

Joined: Sat Jun 21, 2003 7:14 pm
Posts: 461
Location: West MI

What is the easiest way to add anchor plates to the rear crossbar of my H-18. I plan on adding a spinnaker

and wings someday.

Top

gthomas

Post subject:

Posted: Wed Oct 29, 2003 1:32 pm

Site Rank - Old Salt

Joined: Tue May 27, 2003 3:16 pm
Posts: 302
Location: San Diego

Instructions come with the kit. I've done it before and it's pretty simple. Basically, just attach the plate under the deck lip with the crossbar bolt and then drill out the 4 holes from the plate through the hull of the boat and use lots of silicone before bolting it all together. If your boat doesn't have a port hull behind the rear crossbar I'd recommend putting one in so that you can reach to the inside of the hull to attach the nuts.

Greg Thomas

Top

damon

Post subject: Re: H-18 Anchor Plates

Posted: Fri Nov 14, 2003 1:08 am

Site Rank - Captain

Joined: Mon Aug 11, 2003 10:31 pm
Posts: 91
Location: Memphis, TN

DVL wrote:

What is the easiest way to add anchor plates to the rear crossbar of my H-18. I plan on adding a spinnaker

and wings someday.

If you add the anchor plates, please take some pictures as you go along. I need to do this on my 18, and I'd like to run this upgrade as an article at TheBeachcats.com.

Thanks,

Damon Linkous
TheBeachcats.com
damon(AT)thebeachcats(DOT)com

Top

Page 1 of 1

[ 3 posts ]

Board index » Hobie Catamaran Sailing » Hobie 18 / 18SX

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to: