HStrech wrote:
The handles typically are positioned on the inside of the cockpit for several reasons:
1. They are convenient if carrying the kayak sideways.
2. They are out of the way when you don't need them. If positioned on the outside of the kayak, they can interfere with the paddle, catch hooks, gear, etc.
3. They don't get caught on roof racks while car topping.
4. The parts of the kayak where they attach inside the cockpit are very strong, with thick plastic in the mounting locations.
With a little practice loading and unloading the kayak, you'll find that the handle placement we've chosen to recommend for adding the carry handles (part #71190031) is the best choice. Additionally, you will find it's hardly ever necessary to lift the kayak overhead and carry it that way. Drop me a message if you have any further questions.
71190031
HANDLE - SIDE CARRY KIT
US $31.49
Hi ... new Compass owner. Can you provide some suggestions for getting the Compass up on the car rack? I have a 2014 Subaru Outback with the standard rack ... use it extensively with my other paddle yaks ('07 Wilderness Systems Tarpon 140, 2011 Future Beach Angler 160). Both of these I can mount on my car unassisted using the design of the car's rack ... the big notch in the rack between the rails ... will hold the nose of the kayak in place while I lift the tail. However, I am concerned with the rudder on the Compass as I would be putting the weight of the kayak on the rudder while lifting the nose. Suggestions?
Also, tips for using the existing molded handles when lifting the kayaks nose or tail?
I was thinking that a tie-down strap would work as a make-shift handle in the center of the boat?
The handles typically are positioned on the inside of the cockpit for several reasons:
1. They are convenient if carrying the kayak sideways.
2. They are out of the way when you don't need them. If positioned on the outside of the kayak, they can interfere with the paddle, catch hooks, gear, etc.
3. They don't get caught on roof racks while car topping.
4. The parts of the kayak where they attach inside the cockpit are very strong, with thick plastic in the mounting locations.
With a little practice loading and unloading the kayak, you'll find that the handle placement we've chosen to recommend for adding the carry handles (part #71190031) is the best choice. Additionally, you will find it's hardly ever necessary to lift the kayak overhead and carry it that way. Drop me a message if you have any further questions.
71190031
HANDLE - SIDE CARRY KIT
US $31.49
