Hobie Forums http://www.hobie.com/forums/ |
|
Jib Clew Blocks... http://www.hobie.com/forums/viewtopic.php?f=14&t=1731 |
Page 1 of 1 |
Author: | jeffrey [ Tue Apr 19, 2005 9:09 pm ] |
Post subject: | Jib Clew Blocks... |
I am in need of a bit of advice: I am looking to replace the jib clew blocks on my H16. The boat next to mine appears to have a set of Harken Big Bullet Blocks (#125 with breaking strength of 2000lbs). When I look at Salty Dog Marine, they sell a stainless jib clew block for cheap ($5.20) but without a listed breaking strength. I am thinking that I would like to stick with the Harken Carbo blocks and utilize #340 with a breaking strength of 1000lbs. All of the blocks can hold up to 5/16 line. What do you suggest? Thanks for your help! |
Author: | marcusc130 [ Wed Apr 20, 2005 5:06 am ] |
Post subject: | |
I think the blocks from salty dog look fine. The other blocks that you listed would be a bit overkill for the jib on a 16. Those blocks will never hold anywhere near 1000 lbs. So, I would say go for the cheap ones, but that's because I never have any money |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |