| Hobie Forums http://www.hobie.com/forums/ |
|
| Question..... http://www.hobie.com/forums/viewtopic.php?f=14&t=42824 |
Page 1 of 1 |
| Author: | Johnnymoto [ Mon May 21, 2012 5:18 pm ] |
| Post subject: | Question..... |
Is the rod that links both rudders suppossed to be bent in the middle ? Mine has a slight bent right in the middle were the tiller pivot is. |
|
| Author: | MBounds [ Mon May 21, 2012 6:25 pm ] |
| Post subject: | Re: Question..... |
No. It's supposed to be straight. Not uncommon for it to be bent, though. As long as it's not too severe, it's not a big deal as long as the rudders are aligned properly (a bend makes it shorter, so the rudders will be further apart at the trailing edges). |
|
| Author: | Johnnymoto [ Mon May 21, 2012 8:52 pm ] |
| Post subject: | Re: Question..... |
Thanks Mbounds. I`ll try to fix it. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|