| Hobie Forums http://www.hobie.com/forums/ |
|
| Delamination repair http://www.hobie.com/forums/viewtopic.php?f=14&t=43603 |
Page 1 of 1 |
| Author: | jsw2223 [ Mon Jul 02, 2012 6:50 am ] |
| Post subject: | Delamination repair |
I recently discovered some pretty significant delamination in one of my Hobie Cat 16 hulls. I have read the forums on how to repair the delamination. My question is what is actually the best product to do the repair with? I read a lot about West Marine systems epoxy products but have also read about something called git-rot. What do you recommend as the best products to use for hull delamination? |
|
| Author: | jsloan999 [ Mon Jul 02, 2012 8:23 am ] |
| Post subject: | Re: Delamination repair |
I have used Git-Rot on four differnt hull repairs and am very happy with the results. |
|
| Author: | jsw2223 [ Tue Jul 03, 2012 6:25 am ] |
| Post subject: | Re: Delamination repair |
Thanks. I'll look into it. |
|
| Author: | hobiesrock [ Tue Jul 03, 2012 10:45 am ] |
| Post subject: | Re: Delamination repair |
x2 on the git rot. Its MUCH thinner viscosity wise than any laminating or other resins I have seen. It can flow and wick its way into the voids very well. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|