Hobie Forums http://www.hobie.com/forums/ |
|
Rear Crossbar Bracket ID http://www.hobie.com/forums/viewtopic.php?f=14&t=44543 |
Page 1 of 1 |
Author: | gizmoe107 [ Sun Aug 19, 2012 8:08 pm ] |
Post subject: | Rear Crossbar Bracket ID |
Hi Ya'll, I just bought a used Hobie 16 and I'm in the process of learning all the terminology. What are these brackets called on the rear crossbar? I can't find listed on any of the parts diagrams and I need the device that clips into it. Thanks! |
Author: | hobiesrock [ Mon Aug 20, 2012 8:44 am ] |
Post subject: | Re: Rear Crossbar Bracket ID |
Those are just jam cleats. Nothing clips in them. No clue why they are on there. Not stock afaik. |
Author: | optikid [ Mon Aug 20, 2012 2:33 pm ] |
Post subject: | Re: Rear Crossbar Bracket ID |
it was the old style traveler system is should be like that on both sides. |
Author: | hobiesrock [ Mon Aug 20, 2012 3:38 pm ] |
Post subject: | Re: Rear Crossbar Bracket ID |
Hard to tell from pic but it looks like a regular newer style traveler on there? |
Author: | MBounds [ Mon Aug 20, 2012 5:37 pm ] |
Post subject: | Re: Rear Crossbar Bracket ID |
One of those is probably from the original traveler system. The stock set up was one on each side; don't know why someone added another. They can both be removed. While you're at it, get rid of the hose clamp holding down the traveler track at the end (attach it properly with countersunk rivets). |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |