Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 4:09 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Help with rivets
PostPosted: Tue Feb 09, 2016 10:36 am 
Offline
Site Rank - Deck Hand

Joined: Fri Dec 04, 2015 7:20 am
Posts: 21
Location: Hungary - Balaton Lake
code material us sizes eu sizes qt
8010131 Stainles steel. POP 3/16x3/8 PH-SS 0,48 mm x 10 mm 22
8011231 Stainles steel POP 3/16x1/2 PH 0,48 mm x 1,27 mm 20
8010181 ? POP 3/16x1/4 PH 0,48 mm x 0,64 mm 24
8010201 ? POP 3/16x3/8 CSK 0,48 mm x 10 mm 41

Ref HC 16 Can anyone help me with material for rivets in this list ?

Thank you
Massimo


Top
 Profile  
 
 Post subject: Re: Help with rivets
PostPosted: Tue Feb 09, 2016 11:11 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15027
Location: Oceanside, California
All stainless. We don't use any aluminum rivets.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
 Post subject: Re: Help with rivets
PostPosted: Tue Feb 09, 2016 11:56 am 
Offline
Site Rank - Deck Hand

Joined: Fri Dec 04, 2015 7:20 am
Posts: 21
Location: Hungary - Balaton Lake
Thanks a lot


Top
 Profile  
 
 Post subject: Re: Help with rivets
PostPosted: Tue Feb 09, 2016 1:09 pm 
Offline
Site Rank - Old Salt

Joined: Fri Oct 17, 2008 2:21 pm
Posts: 379
Location: Winston Salem, NC
I am a little confused. It seems to me that in all but two of the metric sizes, the decimal point (comma) is in the wrong place. The two that are correct are the American 3/8" length given as 10mm. I don't know how you would order them but you might want to check. The 3/16" size should be 4.8 mm and the 1/2" should be 12.7 mm.for example. Any that you use on the mast should also have the seals that go into the hole first. They look like tall top hats. When the pop rivet is set, they deform but maintain a seal so water won't enter the mast.

_________________
Howard


Top
 Profile  
 
 Post subject: Re: Help with rivets
PostPosted: Fri Feb 19, 2016 6:21 am 
Offline
Site Rank - Deck Hand

Joined: Fri Dec 04, 2015 7:20 am
Posts: 21
Location: Hungary - Balaton Lake
Yes Howard you are right , I made some mistakes on writing down the conversion
Thank you for your interest


Top
 Profile  
 
 Post subject: Re: Help with rivets
PostPosted: Sun Feb 21, 2016 9:52 am 
Offline
Site Rank - Old Salt

Joined: Fri Oct 17, 2008 2:21 pm
Posts: 379
Location: Winston Salem, NC
I didn't mean to send critical but I did want to call attention to the water seal caps that go into the rivet hole before the rivet itself. The dealer I bought rivets from told me about them when I had to replace a cleat on the mast.

_________________
Howard


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group