New Factory Jib Halyards - Specs?

I'm going to replace my jib halyard. Can anyone tell me what kind of jib halyard line that Hobie is shipping with new Hobie 16's? Diameter? I like to keep my boat to factory specs.

Thanks,

Mark Van Doren

_________________
Mark Van Doren
H16 Seabreeze #112205 (Richard Petty Signature Edition)
H14T Fantasia #47787
San Juan 28

Maybe this will help.

Sent from my SM-G955U using Tapatalk

_________________
Marty
1984 H16 Yellow Nationals Redline, "Yellow Fever"
Lake Martin, 'Bama.

Hi Mark - the new boats come with a single-braid Dyneema line, similar to Samson Amsteel, New England STS-WR2 or Yale Vectrus 12.

The line listed in the line guide that HobieMarty posted is for the old system (20' length) with the wire halyard. You'll need about 75' for an Aussie halyard. You could downsize it, but 1/8" line is really hard on the hands. 4 mm is as small as I would go. (3/16" = 4.76 mm).