John,
So much good info, thanks for taking the time to post! There is fiberglass clothe visible at the hull damage location, it almost looks intact, like the resin did not properly wet in this location.
I probably did tie the boat wrong, but I did not crank it down like a 300 lb gorilla, then it was loose when I arrived home, so there must have been some shifting in transit. Also, it was 120 F in LA that day, so my decision making skills might have been compromised.
There is also spider cracks in the gel coat at this location. Do you think I could just get away with some epoxy and gel coat? Should I just apply and sand or do I need to sand and feather first?
Sent from my LG-H918 using Tapatalk