Hobie Forums
http://www.hobie.com/forums/

Trapeze Wires
http://www.hobie.com/forums/viewtopic.php?f=14&t=65532
Page 1 of 1

Author:  Hobiewonkenobi [ Sat Sep 14, 2019 12:34 am ]
Post subject:  Trapeze Wires

Hey everyone. When I bought my boat I had two sets of trap wires. Well turns out one set was for a Hobie 14. My good set isn’t that great either. It really likes to tangle and the wires have lots of kinks. It’s just a real hassle to get them laid out and rigged. I wanted to see if I could make some out of dyneema that we’re remnants I bought for $20 on eBay. I could make four more of these with what I have left over. I cannabalized the 14 set and grabbed the eye hole to protect the lower splice from chafing. What do you think? The ends are Bimmel splices and just to make it even more basic the hand hold is an butterfly knot. I got good at those splices all you need is a bic pen a coat hanger and some Teflon tape. There are two ways to make bimmel splices one requires two bitter ends and the second can be done with one end and when you learn it you feel like a magician.
Image

Author:  Carl3 [ Sun Sep 15, 2019 5:00 am ]
Post subject:  Re: Trapeze Wires

Looks great, I want a set!! Murray's sell a Dynema trap set for north of 100.00
What is the dia of it and it's tensile strength?

Author:  Hobiewonkenobi [ Mon Sep 16, 2019 11:29 am ]
Post subject:  Re: Trapeze Wires

It's 5/16" tensile strength in the 12-14k pound range. If I were doing running rigging I'd get the dyneema core with poly sheath.

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/