Harken H194 replacement screws question

Hobie Team:

I have the H194 block and the screws/locknuts holding the cam cleat bracket to the block body need to be replaced. Does anyone have some guidance on where to get these parts? Harken's website doesn't seem to offer these as spare/replacement parts.

Thanks!
Daniel

_________________
H16 2002 "Islands" Sail No. 107432

They should be size 10-24 screws, which is a standard size. You can start by checking your local Home Depot/ hardware store. As long as they have the correct length in stainless steel, that should be fine. If not, you can always order from McMaster Carr (industrial warehouse), but you will have to order more than you need since they generally don’t sell in small quantities.

sm