Return to Hobie.com
Hobie Forums
It is currently Tue Apr 23, 2024 7:13 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: How much Git Rot?
PostPosted: Thu Jun 21, 2007 10:01 pm 
Offline
Site Rank - Captain

Joined: Fri Jun 08, 2007 10:29 pm
Posts: 48
There's a large soft spot on the starboard ahead of the pylon..and about a foot in front of the rudder on the same side.

It's large, about a foot in front of the pylon..it goes from there up to about 2 feet from the bow. How much Git Rot will I need to order to fill this large of an area.

Why is it always the right side that seems to be affected? From what I've been reading it seems like that's always the side that's getting the soft spots....

Thank you in advance.


Top
 Profile  
 
 Post subject: How much
PostPosted: Fri Jun 22, 2007 11:24 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15035
Location: Oceanside, California
Not always the right side... Maybe regional as one side may be the side people most often climb on and off due to wind direction.

Two small 4 oz bottles of Git Rot should do it as long as you limit the pressure when squirting into the deck. The delamination is paper thin in most cases. More pressure just forces the layers apart.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group