Hobie Forums http://www.hobie.com/forums/ |
|
2018 Outback and using an Anchor Wizard http://www.hobie.com/forums/viewtopic.php?f=140&t=63828 |
Page 1 of 1 |
Author: | drjohn [ Thu Oct 04, 2018 8:21 am ] |
Post subject: | 2018 Outback and using an Anchor Wizard |
Has anyone put an Anchor Wizard on their 2018 Outback? Since the rudder flips up, I am wondering how to mount the unit. I recently purchased the Outback and have done no modifications as of yet. Just exploring my options. Thanks. |
Author: | Clay34 [ Sat Oct 06, 2018 6:30 pm ] |
Post subject: | Re: 2018 Outback and using an Anchor Wizard |
Tim Percy has a nice video on mounting an anchor wizard on his boat: https://www.youtube.com/watch?v=YyZ7_z91KCw Hope this helps - Thanks to Tim. |
Author: | drjohn [ Sun Oct 07, 2018 5:12 pm ] |
Post subject: | Re: 2018 Outback and using an Anchor Wizard |
Thanks! I’ll check it out. |
Author: | drjohn [ Mon Oct 08, 2018 7:50 am ] |
Post subject: | Re: 2018 Outback and using an Anchor Wizard |
Thanks for the reply! |
Author: | drjohn [ Tue Oct 09, 2018 7:56 pm ] |
Post subject: | Re: 2018 Outback and using an Anchor Wizard |
Unfortunately that video is for a Compass, not an outback. That boat has no rudder. Thanks anyway |
Author: | pounce [ Wed Oct 10, 2018 5:27 am ] |
Post subject: | Re: 2018 Outback and using an Anchor Wizard |
drjohn wrote: Unfortunately that video is for a Compass, not an outback. That boat has no rudder. Thanks anyway The compass has a rudder. |
Author: | Clay34 [ Wed Oct 10, 2018 6:39 am ] |
Post subject: | Re: 2018 Outback and using an Anchor Wizard |
Looks like Tim's install should still not interfere with a rudder. The anchor wizard is installed on the bow of the boat. Tell me what the concern is? |
Author: | drjohn [ Tue Oct 16, 2018 7:43 pm ] |
Post subject: | Re: 2018 Outback and using an Anchor Wizard |
I don’t know about the Compass as I am very new to kayak fishing and the Hobiei line. In most videos I have seen, the anchor portion of the Anchor Wizard is mounted to the stern of the kayak and the control is usually mounted within reach of the operator. My concern is that the rudder of the Outback flips up onto the stern of the boat when not deployed. I believe the anchor assembly would be is the way of the rudder when it is in its “up” position. That was why I originally posed the question. In hindsight, I suppose it could be mounted to the opposite end of the kayak at the bow so as not to disrupt the rudder assembly, etc. Thanks |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |