| Hobie Forums http://www.hobie.com/forums/ |
|
| 2019 Hobie Outback turbofins? http://www.hobie.com/forums/viewtopic.php?f=140&t=63887 |
Page 1 of 1 |
| Author: | jsuber [ Wed Oct 17, 2018 10:04 am ] |
| Post subject: | 2019 Hobie Outback turbofins? |
On my maiden trip out of Venice Louisiana I bent the front mast on my mirage drive. So I ordered a replacement from ACK and what I got was too long. So do I have turbo fins? My bent rod from the 2019 Hobie Outback is on the right Hobie Mirage Turbo Fin Replacement Mast - Mirage Drive 180 V2 Is the rod on the left. ST Turbo fin from my Outback on far left. |
|
| Author: | mmiller [ Wed Oct 17, 2018 4:35 pm ] |
| Post subject: | Re: 2019 Hobie Outback turbofins? |
That would be a Turbo mast for the older drives or maybe V1 of the MD180. You need the current V2 MD180 Turbo mast. 81529002 MAST V2 MD180 TURBO (ADJ) (adjuster screw on the end) z362.jpg)
|
|
| Author: | jsuber [ Wed Oct 17, 2018 5:41 pm ] |
| Post subject: | Re: 2019 Hobie Outback turbofins? |
So it’s not called a mast for a turbo fin. By chance I ordered the right part the second time per their recommendation. But that makes me think that there is a different turbo fin which in the last mirage drive was a longer mast. Thanks. |
|
| Author: | Roadrunner [ Wed Oct 17, 2018 11:09 pm ] |
| Post subject: | Re: 2019 Hobie Outback turbofins? |
That's correct. Turbofins for the GT Drive use longer masts. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|